Click Here For Larger Image

Sigtronics EGT 101 Digital EGT
Now you can upgrade to DIGITAL without replacing your probe. Just pull out the old analog and slip in the New EGT 101; connect to power and enjoy Digital Accuracy, Convenience and Reliability!
UNIQUE built-in isolation power supply allows you to use the EGT 101 to replace any EGT which uses the conventional alumel/chromel (K Type) probe, regardless of the probe “grounding” configuration. The K Type probe, identified by its red (-) and yellow (+) lead terminations, has been the standard probe for many years.
LARGE LCD DISPLAY is easy to view in the sunlight. Back lighting is provided for night flying. The lighting circuit can also be connected to the aircraft panel light dimmer circuit.

Sigtronics EGT 101 Digital EGT

1 Degree F RESOLUTION allows precise fuel leaning for maximum economy and engine protection. Typical analog gauges offer only 25 degrees of resolution. Parallax error, resulting from variance in viewing angle, further degrades the readability of the analog gauge.

ADVANCED DESIGN totally eliminates the need for costly field calibration during installation. The EGT 101 is designed to read thermocouple voltage directly, therefore the accuracy is not affected by thermocouple wire length or gauge.

SPECIFICATIONS:

• Single channel, however a switch may be installed for multi-channel applications.
• Probe input: Single alumel/chromel (K Type) probe.
• Polarity marked mounting studs on rear of case.
• Accuracy: ± 0.5% at 1500° F
• Weight: 4.2 ounces
• Dimensions: 2.5” x 2.5” x 3.5” deep
• Voltage Requirement: 10-34VDC
• Operates on 12V or 24V systems
• Current Drain: 0.015 amps, exclusive of lighting system.

Warranty: One year parts and labor

Shipping Weight 5 lbs

Jeppesen Three-Ring Trifold Kneeboard
Great for holding approach charts. Valuable IFR flight information on clipboard!
Our Price: $42.70